EZ Street is a technologically advanced, all-temperature asphalt. It's ready to go right out of the bag, or off the stockpile, without heat, or any special treatment.

Guaranteed Permanent
Works in Water & All Weather
Bonds to Asphalt and Concrete
Instantly Traffic-Ready
"Throw & Go" Approved
Stockpiles for Months
No Mixing, No tack
Always Workable

Potholes

Utility Cuts

Overlays

Edge Repairs

Manhole/Valve/

Drain Surrounds

Our customers apply EZ Street as a simple, cost-saving, permanent solution to a resourceful spectrum of asphalt and road work, including paving.

SWEEP

Clear away loose debris, sand, leaves, rubber duckies, etc. (you can leave the water). Instead of building a foundation for the repair, you’re clearing one off.

EZ Street asphalt will adhere to anything solid in the pothole, but if it’s not fixed to the pavement, your repair won’t be either.

You’ll know it's ready when there’s nothing loose along the edges, or bottom of the pothole for the repair to stick to.

FILL

If the crater’s deeper than three inches, it’s a good idea to fill in two inch layers, or “lifts”, compacting each layer before adding the next, to increase the density of the foundational layers.

Fill the pothole to just over the level of the existing pavement. Then…